The Bellman Milk Steamer gives you the power to steam silky-smooth textured milk at home for your milk-based espresso drinks. By heating the unit on your stove, you're able to create enough pressure to steam milk (dairy or non-dairy) using the steam wand with a built-in 2-hole tip. You'll be enjoying smooth, creamy café quality drinks at home or while travelling.
The Bellman CX-25 series can be used on gas, electric, open flame and most induction stovetops. Compact and easy to use. Create professionally steamed milk on the go - the Bellman is perfect for camping and travel! Entertaining? The Bellman can steam enough milk for a few drinks in a row.
Specifications
Material: 18/8 stainless steel
Handle and Knob: Bakelite
7.28” x 6.29” x 10.23”
Use & Care
To Steam Milk with the Bellman Milk Steamer:
Unscrew Knob and remove the head piece.
Fill the body with cold water (below the handle line).
Replace head piece and tighten knob.
Place steamer on medium high heat on the stovetop. Allow the machine to heat for 3-5 minutes -until there is sufficient pressure in the boiler.
Open the steam valve for a few seconds to bleed water inside the steam wand.
If the steam doesn't produce a strong, steady hiss, raise the heat slightly.
If the steam explodes from the tube at half a turn of the knob, reduce the heat.
Froth milk: Fill a milk pitcher 1/3 full with cold milk.
Immerse the steam wand into the milk.
Slowly open the steam valve until you have a strong flow of steam.
Move the steam wand up as the froth builds.
To Clean the Bellman Milk Steamer:
Open the steam valve and release the pressure
Let the machine body cool down
Clean milk from the steam tube
PLEASE READ FOR YOUR SAFETY The bottom o-ring of CX-25 series (CX-25S, CX-25, CX-25P) is very important. The device may explode if the screw is not fixed correctly. DO NOT REPLACE THE BOTTOM O-RING BY YOURSELFif you don't have proper tools to replace it. Please pay close attention when replacing the BOTTOM O-RING. Prepare an electronic or air compressing tool to release and lock the nut of the bottom of CX-25 series. Holding the main body tightly, the torque of locking the nut of the bottom of CX-25 series should be 6~8 kgs. Too much torque may damage the screw. The hole at the bottom of CX-25 series is not circle shaped. The shape is for fitting the shaft screw. Please make sure the lines of these two parts are aligned correctly before locking the nut of the bottom of CX-25 series.
Specifications
Material: 18/8 stainless steel
Handle and Knob: Bakelite
7.28” x 6.29” x 10.23”
Use & Care
To Steam Milk with the Bellman Milk Steamer:
Unscrew Knob and remove the head piece.
Fill the body with cold water (below the handle line).
Replace head piece and tighten knob.
Place steamer on medium high heat on the stovetop. Allow the machine to heat for 3-5 minutes -until there is sufficient pressure in the boiler.
Open the steam valve for a few seconds to bleed water inside the steam wand.
If the steam doesn't produce a strong, steady hiss, raise the heat slightly.
If the steam explodes from the tube at half a turn of the knob, reduce the heat.
Froth milk: Fill a milk pitcher 1/3 full with cold milk.
Immerse the steam wand into the milk.
Slowly open the steam valve until you have a strong flow of steam.
Move the steam wand up as the froth builds.
To Clean the Bellman Milk Steamer:
Open the steam valve and release the pressure
Let the machine body cool down
Clean milk from the steam tube
PLEASE READ FOR YOUR SAFETY The bottom o-ring of CX-25 series (CX-25S, CX-25, CX-25P) is very important. The device may explode if the screw is not fixed correctly. DO NOT REPLACE THE BOTTOM O-RING BY YOURSELFif you don't have proper tools to replace it. Please pay close attention when replacing the BOTTOM O-RING. Prepare an electronic or air compressing tool to release and lock the nut of the bottom of CX-25 series. Holding the main body tightly, the torque of locking the nut of the bottom of CX-25 series should be 6~8 kgs. Too much torque may damage the screw. The hole at the bottom of CX-25 series is not circle shaped. The shape is for fitting the shaft screw. Please make sure the lines of these two parts are aligned correctly before locking the nut of the bottom of CX-25 series.
Expédition + commandes
Disponible pour nos clients en magasin ! Ramassage gratuit en magasin. Sélectionnez simplement l'option de ramassage en magasin lors du paiement pour récupérer votre commande en ligne en magasin. Pour plus d'informations, consultez notre politique complète de ramassage en magasin .
Tarifs d'expédition au Canada
Notre tarif d'expédition standard au Canada pour les commandes inférieures à 79 $ est un tarif forfaitaire de 14,99 $. Les commandes de plus de 79 $ bénéficient de la livraison standard gratuite.
TARIFS DE LIVRAISON DISPONIBLES
TARIF DE LIVRAISON
PRIX
Livraison gratuite à partir de 79 $
GRATUIT
Expédition standard
14,99 $
Ramassage en magasin Ancaster*
GRATUIT
Ramassage en magasin Burlington*
GRATUIT
Ramassage en magasin Etobicoke*
GRATUIT
Livraison locale le jour même (du lundi au vendredi)**
9,99 $ (commandes de plus de 79 $)
Livraison locale le jour même (du lundi au vendredi)**
16,99 $ (commandes inférieures à 79 $)
Expédition express
40 $
*Les options de retrait en magasin sont visibles uniquement pour les codes postaux situés dans nos zones de vente au détail.Vous ne pouvez récupérer que les articles qui sont actuellement en stock à cet endroit.
**La livraison locale le jour même est disponible uniquement pour certains codes postaux dans certaines zones de livraison. Les commandes passées après 11 h seront expédiées le lendemain.
Des frais supplémentaires peuvent s'appliquer pour les adresses situées dans des endroits éloignés. Veuillez consulter notre page Expédition et commandes pour connaître notre politique d'expédition complète.
Tarifs d'expédition aux États-Unis
Notre tarif d'expédition standard vers les États-Unis continentaux est de 9,99 USD.
Si vous avez d'autres questions, veuillez envoyer un e-mail à webdesk@ecscoffee.com ou appelez-nous sans frais au 1-800-263-3890 . Nous serons heureux de vous aider !